Small Wind Turbine Enair 30PRO
The most advanced technology on the market.
The E30PRO wind turbine is designed to meet the energy demand of any home, even with low wind. Its generation and design efficiency allows us to generate energy with very low wind and, in turn, it efficiently support strong wind generation. Its production is more than 30kWh / day , with wind average between 8 and 12m/s.
The new designs have been realized strictly following the IEC 61400-2 standard, innovating in techniques such as Computational Fluid Dynamics, for aerodynamic optimization. These techniques of the Aerospace industry, increase the efficiency in energy generation and cause a total absence of noise while giving great strength to the whole, turning it into a professional machine with high performance and a lifetime warranty of more than 25 years .
3,8m
Diameter
125kg
Weight
3,4m
Side
CLASS I
pasive control
Data sheet
Technical breakdown of the Enair 30PRO series point by point
| Enair 30PRO | |
|---|---|
| Number of blades | 3 |
| material of blades | Glass fiber with resins and polyurethane core |
| Generator | 250rpm nominal | Neodymium magnets |
| Power | 3000W |
| Nominal power | 1900W (IEC 61400-2) |
| Tension | 24 / 48 / 220V |
| Wind class | CLASS I / IEC 61400-2 / NVN I - A |
| Diameter | 3,8m |
| Turning sense | Schedule |
| Swept Area | 11,34m2 |
| Weight | 125Kg |
| Applications | Charging 24 or 48V batteries and grid connection |
| Wind to Start | 2m/s |
| Rated Speed | 11m/s |
| Speed variable pitch regulation | 12m/s |
| Supported Speed | 60m/s |
| Efficient generation range | From 2 to 60m/s |
| Type | Windward horizontal windward axis rotor |
| Orientation | Passive system with steering rudder |
| Power control | Passive centrifugal variable pitch system with two actuation speeds |
| Transmission | Direct |
| Brake | Electric by short circuit and aerodynamic by variable pitch |
| Controller | Grid connection and battery charge. |
| Inverter | Efficiency 97%; MPPT algorithm |
| Noise | 48db | Reduced to a minimum due to the design of the blades and the low revolutions. 1% more than ambient wind noise |
| Anti-corrosion protection | Airtight, epoxy paint drying in high temperature furnace, generated a plastic coating |
| Tower | Lattice, clip, tubular. Foldable or fixed variable heights according to conditions |
Production charts
Cp= 0.41
Power Energy
Power curve
Power (W)
Wind speed (m/s)
Values represented according to IEC-61400-2.
Annual production
Annual energy (Wh)
Wind speed (m/s)
To perform a wind production calculation, it is necessary to consider multiple factors such as Weibull values, air density, soil roughness factor, temperature, etc. Given the complexity of the calculations, we recommend using this simple tool
All the technical documentation to a click
Able to extract the maximum energy from the wind
The wind turbine Enair 30 PRO, has a large rotor diameter capable of extracting the maximum energy from the wind at low speeds, achieving its nominal power at 10m/s. After the tests of the certifications, the results for this model are highly satisfactory.
Of this model there are records of wind generation of more than 35kWh/day, which gives us a very high energy efficiency regime.
New application for production studies
Incredible improvement in our production calculation application
Characteristics
Enair Technology
To have today a 360º knowledge in all manufacturing and installation processes and also count with the support of the European Union as a partner for the development of technology, places us in a place Preferential within the market, providing efficient and above all satisfactory solutions for the end user and with the maximum level of technological development .
The most advanced technology of the wind farm
Mínimum noise
The noise is around 1% above ambient noise, being practically invaluable to our ears.
Safety-Brake
New mechanical safety system to the axle that guarantees braking under the most adverse conditions, for winds even greater then 70m/s
Anticorrosive
Treated with epoxy paint it becomes to a set of anti-corrosion and antisaline ideal for islands and coasts.
Maximum efficiency
It works with a simple breeze of 2m/s and continues to run over 40m/s without losing productivity efficiency.
Remote-Control
Combined control with the Victron Venus that allows the wind turbine to run/stop remotel.
Storm-Detection
Intelligent storm detection algorithm and safety lock of the fully automatic wind turbine combined with the Safety-Brake.
Anti-Icing and Hermetic
Structural resin acrylic urethane with an anti-ice chemical composition and maximum resistance for temperatures up to -50°C. Hermetically, perfect for coastal or desert areas.
Hardy
In order to withstand strong winds and offer a long operating life of more than 25 years, all parts of the equipment are oversized according to the IEC 61400-2 standard, this implies safety factors of 9 in many cases.
BBS (Battery Brake System)
Intelligent system that measures the level of battery charge and allows the wind turbine to stop when the battery reaches the setpoint voltage, resuming when the load level drop.
Pasive Pitch Control
Pitch control operation
The active pitch control of 2 speeds is the latest technology in small wind turbine to absorb strong winds maintaining the production of energy of constant form. This patented technology has two phases, the first one that absorbs the wind gusts and another one that in case of very strong winds maintained.
Details
How it's made
Using the latest technology and the best materials.
The production of the PRO series , consist in more than 7 independent processes each carried out in different specialized centers so that we can guarantee a maximum reliability in the completion of its parts. Thus obtaining a product of great quality that meets the requeriments of the most demanding markets.
Econ
Save on your light bill in just 3 steps
Uses
Grid connected
Distributed energy generation. By means of this type of installation each dwelling can generate its own energy and sell the surplus to the electric company.
Isolated consumption
These installations are used when there is a great cost or difficulty to bring the power of the electricity grid to the place necessary for its consumption.
Water pump
One of the main characteristics and novelties of this new generation of wind turbines is the possibility of obtaining a water extraction by means of a direct pumping.
Outstanding facilities
One phase installation 100% renewable in Sos del Rey Católico
Aragón
Installation designed for self-supporting renewable energy based telecommunication antennas combining the sun and wind as primary energy sources and supported by a diesel generator to cover low resource moments.
Daily energy (kWh): 0
Sustainable Livestock industry
Lugo
The sustainable livestock industry is equipped with 100% Enair technology that provides an entire livestock facility with renewable energy and becomes totally sustainable self-supplying energy.
Daily energy (kWh): 16.8
