Small wind turbines E200 in Salina Cruz
Equipment used for this installation
- Salina Cruz, Mexico li>
- 2 Enair 200 20kW li>
- 2 Fronius Eco27 27 kW inverters li>
- 2 Resistances of 20kw li>
- 2 Control Computers li>
- 2 Towers of 8m located at 25m height li> ul>
Wind data of daily, monthly and annual generation.
- WIND SPEED SHAFE HEIGHT 7.5m/s
- DENSITY FACTOR: 106.29%
- AVERAGE OUTPUT POWER: 7970W
- ANNUAL ENERGY: 69828kWh/año
- MONTHLY ENERGY: 5819kWh/mes
- OPERATING TIME: 90%
- MARGIN OF LOSSES: 18
- DAILY ENERGY: 191.2kWh/día
- (*Assuming correct wind speed)
Total and maximum generation.
- GENERATION AVERAGES
- Total wind 191.2kWh/día
- Photovoltaic 0kWh/día
- MAXIMUM ATTAINABLE:
- Total wind 372.6kWh/día
- Photovoltaic 0kWh/día
Frequencies Rose (%)
Speeds Rose (m/s)
Small wind turbines E200 in Salina Cruz
The technology of our model E200 has been installed in an ice factory in Salina Cruz (Mexico), supplying as well part of the electricity consumption that the installation needs.
In the area of Oaxaca with an average wind of about 7.5m/s is the ideal place to demonstrate the efficiency of our E200 series, these two wind turbines installed on the roof of the ice factory at a height of 25m (including its towers of 8m) are capable of generating an average of 190.6kWh/day
This installation will cover an energy demand around 20% of the total of the factory, the grid connection installation is composed of 2 wind turbines E200 of 20kW together with 2 inverters Fronius Eco27 of 27kW.
Thanks to its two control computers can be managed remotely from anywhere optimizing its production to be able to modify the parameters of the wind turbine based on weather at any time.